GPS Mouse User’s Manual
6. UN-INSTALL THE USB DRIVER
Run the file the
PL-2303 Driver Installer.exe
7. FAQs
I am not getting GPS data into my application.
1.Check your DEVICE MANAGER to confirm the COM Port number assigned to
the GPS Receiver (it will be listed under the
Prolific
Serial-to-USB Comm.
number configured in your application.
2.Be sure your Baud rate is configured correctly at:
Baud Rate: 115200
Data bit: 8
Parity: None
Stop Bit: 1
Flow Control: None
3.Re-boot your computer and then insert the USB GPS into a USB port.
4.Configure the GPS Info utility with the correct COM Port and test your GPS
receiver first before using it in your application.
Will the GPS work with other Street Mapping
GlobalSat GPS receivers provides standard NMEA data for mapping software to
use and convert to coordinates and should work well with most
compliant software on the market today.
How accurate is the GPS?
The USB GPS is WAAS/EGNOS
through authorized resellers, these units are WAAS/EGNOS enabled unless
otherwise stated. Accuracy can be up to 5 meters 3D RMS with WAAS enabled
and 10-15 meters 2D RMS WAAS disabled
Why do I only see the GPS signal?
Due to huge amount of NMEA data
115200 will only support NMEA
10
INSTALL THE USB DRIVER
2303 Driver Installer.exe
to uninstall the USB GPS driver.
s
not getting GPS data into my application.
Check your DEVICE MANAGER to confirm the COM Port number assigned to
the GPS Receiver (it will be listed under the
PORTS (COM & LPT)
heading as
USB Comm.
Then be sure this is the same COM port
number configured in your application.
Be sure your Baud rate is configured correctly at:
boot your computer and then insert the USB GPS into a USB port.
Configure the GPS Info utility with the correct COM Port and test your GPS
receiver first before using it in your application.
Will the GPS work with other Street Mapping software?
at GPS receivers provides standard NMEA data for mapping software to
use and convert to coordinates and should work well with mostly any NMEA
compliant software on the market today.
WAAS/EGNOS capable, and for units sold in North America
resellers, these units are WAAS/EGNOS enabled unless
otherwise stated. Accuracy can be up to 5 meters 3D RMS with WAAS enabled
15 meters 2D RMS WAAS disabled.
signal?
amount of NMEA data for all satellite systems, the default Baud rate
NMEA from GPS and hide others.
INSTALL THE USB DRIVER
the USB GPS driver.
s
Check your DEVICE MANAGER to confirm the COM Port number assigned to
heading as
Then be sure this is the same COM port
boot your computer and then insert the USB GPS into a USB port.
Configure the GPS Info utility with the correct COM Port and test your GPS
at GPS receivers provides standard NMEA data for mapping software to
any NMEA
capable, and for units sold in North America
resellers, these units are WAAS/EGNOS enabled unless
otherwise stated. Accuracy can be up to 5 meters 3D RMS with WAAS enabled
the default Baud rate
