GLOBALO 5900652387823, Инструкции по эксплуатации и монтажу

Страница: 26 / 56

26
EN
PREPARATION BEFORE HOOD INSTALLATION
• Check whether the dimensions of the purchased product are suitable for the selected place of
installation.
• Disconnect and remove (if possible) any appliances in the installation space to facilitate access
to the ceiling or wall where the hood will be installed. If this is not possible, secure these ele-
ments.
• Check whether there is a socket near the hood installation space and whether it is possible to
connect the hood to a ventilation duct for fume extraction.
• Make sure there are no lines of electric and plumbing installations in places where holes will
be drilled.
• Prepare the following tools: tape measure, pencil, drill/driver, Ø3 mm drill bit, screwdriver,
level.
CAUTION!
TAKE CARE NOT TO SCRATCH THE HOOD.
Fig. 4
596
546
490
266
240
125
140
80
203
58
O 120
228 229
796
746
690
266
240
125
140
80
203
58
O 120
228 229
HADARIO 60
HADARIO 80