Globaljig SYSTEM, Руководство пользователя

Страница: 15 / 28

USER’S MANUAL
SYSTEM/VECTOR
CHAPTER 7
7.3. APPLYING THE PULLING CHAIN
One end of the 3-meter-long, high resistance steel link chain is free while
the other end is fit with a pulling hook.
7.4. DIRECT PULLING
Connect the pulling hook to the terminal secured
to the body, insert the free end over the snub
pulley located inside the vertical body,
positioning it on one of the holes present (the
position of the snub pulley determines the
pulling direction height). (fig. 07 - 03).
Lower the end of the
chain until the snub
pulley is set in the fork
connection. Then pull
it until it engages the
position that has
been arranged for it

(fig. 07 - 04).
fig. 07 - 05
Depending on the desired
pulling direction, the chain runs
as indicated in
fig. 07 - 05 or
fig. 07 - 06.
