3
KIT CONTENTS
This instruction manual is designed to help you build a straight, great flying airplane. Please read
this manual thoroughly before beginning assembly of your new Ultimate Biplane. Use the parts
listing below to identify and separate all parts before beginning assembly.
** KIT CONTENTS** We have organized the parts as they come out of the box for better iden-
tification during assembly. We recommend you regroup the parts in the same manner. This will
ensure you have all of the parts required before you begin assembly and will also help you familiar-
ize yourself with each part.
AILERON CONTROL SYSTEM
MOTOR MOUNT ASSEMBLY
AIRFRAME ASSEMBLIES
MAIN GEAR ASSEMBLY
TAIL WHEEL ASSEMBLY
ELEVATOR CONTROL SYSTEM
RUDDER CONTROL SYSTEM
FUEL TANK ASSEMBLY
o
{1} Fuselage w/Metal Cabane Struts, Pushrod
Housings, Wood Gear Cover (D-29), and
Horizontal Stabilizer Spacer (D-26A)
o
{1} Bottom Wing w/Ailerons & Hinges
o
{1} Top Wing w/Ailerons & Hinges
o
{1} Vertical Stabilizer w/Rudder & Hinges
o
{1} Horizontal Stabilizer w/Elevator Halves & Hinges
o
{2} Outboard Interplane Struts
o
{1} Fiberglass Cowling
o
{1} Clear Canopy
o
{1} Prebent Aluminum Landing Gear
o
{2} Wheel Pants
o
{2} 60mm Diameter Wheels
o
{3} 4mm x12mm Machine Screws
o
{2} 4mm x 35mm Axle Screws
o
{4} 2mm x 8mm Wood Screws
o
{2} 4mm Flat Washers
o
{2} 4mm Hex Nuts
o
{2} 4mm Lock Nuts
o
{4} 4mm Nylon Spacers
o
{1} Tail Wheel Wire w/Nylon Bearing
o
{1} 25mm Diameter Tail Wheel
o
{1} Wheel Collar w/3mm x 6mm Machine Screw
o
{2} Nylon Control Horns w/Nylon Back Plates
o
{4} 2mm x 15mm Machine Screws
o
{2} 600mm Nylon Pushrods
o
{2} 2mm x 100mm Wire Threaded Both Ends
o
{3} Nylon Clevises (one w/1.5mm I.D. Hole)
o
{1} Nylon Joiner Plate
o
{2} 2.2mm x 10mm Wood Screws
o
{4} 2mm Flat Washers
o
{1} 2mm x 20mm Machine Screw
o
{1} 2mm Hex Nut
o
{1} Nylon Control Horn w/Nylon Back Plate
o
{2} 2mm x 15mm Machine Screws
o
{1} 700mm Nylon Pushrod
o
{1} 2mm x 120mm Wire Threaded Both Ends
o
{1} 2mm x 85mm Wire Threaded w/L-Bend
o
{1} Nylon Snap Keeper
o
{1} Nylon Clevis
o
{4} Nylon Control Horns w/Nylon Back Plates
o
{8} 2mm x 15mm Machine Screws
o
{2} 2mm x 200mm Wire Threaded w/L-Bend
o
{2} 2mm x 85mm Wire Threaded w/L-Bend
o
{4} Nylon Clevises
o
{4} Nylon Snap Keepers
o
{2} Nylon Adjustable Control Horns
THROTTLE CONTROL SYSTEM
o
{1} 1.5mm x 300mm Wire Threaded One End
o
{1} Nylon Clevis w/1.5mm I.D. Hole
o
{1} Adjustable Servo Connector Assembly
o
{2} Nylon Mounting Beams
o
{4} 3mm x 20mm Machine Screws
o
{4} 3mm x 25mm Machine Screws
o
{16}3mm Flat Washers
o
{8} 3mm Lock Nuts
o
{1} Molded Fuel Tank
o
{1} Rubber Stopper
o
{1} 20mm Diameter Front Squash Plate
o
{1} 18mm Diameter Rear Squash Plate
o
{1} 3mm x 20mm Machine Screw
o
{1} Weighted Metal Pick-Up
o
{3} Aluminum Tubes
o
{1} 90mm Silicon Fuel Tube
MISCELLANEOUS
o
{1} Wing Bolt Doubler (W-24)
o
{2} Wing Servo Mounting Plate (W-25)
o
{1} Wing Cabane Shim (D-31)
o
{2} Pushrod Supports (D-32)
o
{1} Fuselage Servo Tray (D-15)
o
{2} Balsa Support Rails (D-30)
o
{4} 2mm x 10mm Wood Screws
o
{4} 3mm x 6mm Wood Screws
o
{1} 35mm Clevis Retaining Tube
WING MOUNTING
o
{4} 3mm x 16mm Machine Screws
o
{8} 3mm Flat Washers
o
{4} 3mm Blind Nuts
o
{2} 4mm x 25mm Machine Screws
o
{2} 4mm Flat Washers
o
{2} 4mm Blind Nuts
o
{1} 3mm x 50mm Machine Screw
o
{1} 3mm x 35mm Machine Screw
o
{2} 3mm Lock Nuts