Global MAXI S 4500LX Скачать руководство пользователя страница 6

Страница: 6 / 40

WARNINGS AND CAUTIONS

WARNING

TO REDUCE THE RISK OF INJURY, THE MOTION OF THE CHAIR DUE TO AUTO-

RETURN AND MEMORY POSITIONING CAN BE STOPPED IMMEDIATELY BY

PRESSING ANY KEY ON THE KEYPAD.

WARNING

TO HELP PREVENT MISUSE OF THE EXAM CHAIR WHILE PATIENTS ARE LEFT

UNATTENDED, ALWAYS ENGAGE THE SAFETY LOCK BEFORE LEAVING THE

ROOM.

WARNING

DISCONNECT ALL ELECTRICAL POWER PRIOR TO CLEANING AND

DISINFECTING. RISK OF ELECTRICAL SHOCK RESULTING IN DEATH OR

INJURY IS POSSIBLE IF THE ELECTRICAL POWER IS NOT DISCONNECTED.

WARNING

NO MODIFICATION OF THIS EQUIPMENT IS ALLOWED.

WARNING

TO PREVENT RISK OF SHOCK OR INJURY, DO NOT USE OTHER ELECTRICAL

EQUIPMENT ON THE PATIENT WITHOUT FIRST ENSURING PROPER

GROUNDING OF CHAIR.

WARNING

THE USE OF POWER CORD AND PLUG OTHER THAN THOSE INCLUDED WITH

THE MAXI S 4500LX EXAMINATION CHAIR AND SUPPLIED BY GLOBAL

SURGICAL

CORPORATION MAY RESULT IN INCREASED EMISSIONS OR

DECREASED IMMUNITY OF THE S 4000 EXAMINATION CHAIR.

WARNING

IT IS HIGHLY RECOMMENDED THAT THE INSTALLATION OF THIS EQUIPMENT

BE PERFORMED BY QUALIFIED TECHNICIANS. INSTALLATION BY

UNQUALIFIED INDIVIDUALS COULD RESULT IN PERSONAL INJURY.

WARNING

DO NOT CLEAN ANY SURFACE WITH PETROLEUM-BASED SOLVENTS SUCH

AS ACETONE OR M.E.K. (METHYL ETHYL KETONE). THESE SOLVENTS WILL

REMOVE PAINT AND CAUSE PERMANENT DAMAGE TO VINYL AND PLASTIC

SURFACES. USING THESE SOLVENTS ALSO PRESENTS A DANGER TO

PERSONNEL IF THEY ARE OPENED IN A POORLY VENTILATED ROOM.

WARNING

TO AVOID THE RISK OF ELECTRIC SHOCK, THIS EQUIPMENT MUST ONLY BE

CONNECTED TO A SUPPLY MAINS WITH PROTECTIVE EARTH (=GROUND).

WARNING

CONNECTING EQUIPMENT TO THE MULTIPLE SOCKET-OUTLET EFFECTIVELY

LEADS TO CREATING A MEDICAL ELECTRICAL SYSTEM AND THE RESULT CAN

BE A REDUCED LEVEL OF SAFETY. THE ONLY EQUIPMENT INTENDED TO BE

CONNECTED TO THE CHAIR IS THE SOLAR LITE MANUFACTURED BY GLOBAL

SURGICAL CORPORATION.

WARNING

TO MINIMIZE THE RISKS DUE TO MOVING PARTS AND PINCH POINTS,

ENSURE THE PATIENT IS SEATED AS INTENDED WITH HEAD SUPPORTED BY

THE HEADREST, ARMS SUPPORTED BY THE ARMRESTS AND LEGS

SUPPORTED BY THE CALF REST BEFORE OPERATING THE CHAIR.

OPERATORS SHOULD KEEP THEIR FREE HAND AND THEIR FEET AWAY FROM

THE CHAIR WHILE THE CHAIR IS MOVING.

Содержание MAXI S 4500LX









































Результаты поиска

Содержание MAXI S 4500LX

Отзывы:

Бренды по названию

Популярные бренды

Global MAXI S 4500LX, Руководство пользователя

Результаты поиска

Содержание MAXI S 4500LX

Отзывы:

Бренды по названию

Популярные бренды