manualshive.com logo in svg

Global MAXI S 4500LX, Руководство пользователя

Поделиться
Скачать
Global MAXI S 4500LX Скачать руководство пользователя страница 10

Section 1 

General Information

1-3

WARNING

!

FAILURE TO FOLLOW THESE INSTRUCTIONS WILL RESULT IN DAMAGE TO THIS  

CHAIR OR POSSIBLE INJURY (RECEIVER’S RESPONSIBILITY).

WARNING

!

IT IS HIGHLY RECOMMENDED THAT THE INSTALLATION OF THIS EQUIPMENT 

BE PERFORMED BY QUALIFIED TECHNICIANS. INSTALLATION BY UNQUALIFIED 

INDIVIDUALS COULD RESULT IN PERSONAL INJURY.

WARNING

!

DO NOT LIFT THE CHAIR BY THE ARMS OR HEADREST.

WARNING

!

DO NOT REMOVE THE STRAP OR 2 X 4 WOOD BRACE HOLDING THE SEAT IN 

PLACE UNTIL THE CHAIR IS IN IT’S PERMANENT LOCATION.

NOTICE

Check for damage before discarding the shipping material and notify Global 

Surgical Customer Service if shipping damage is observed.

NOTICE

Leave the chair on the wooden skid until qualified technician begins installation.

1.  Inspect all packaging for any visible signs of damage.  

2.  Make a notation on the delivery receipt if the packaging was previously opened and check the package for 

proper content. 

1.3. Unpacking Instructions

Figure 1-1 Unpacking

!

WARNING

DO NOT REMOVE

 this strap 

or 2 x 4 wooden brace until 

chair is in its permanent 

location.

Lift under back here

Lift under seat here

DO NOT

 lift by the headrest

DO NOT

 lift by the arms

DO NOT REMOVE

UNT
IL

 CHAIR IS PLACED IN IT

S

PERMANENT LOC

ATION

!

Содержание MAXI S 4500LX









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды