9
The M3 System® Delivery Module
INSTALLATION
How to install
M3 System
6 steps to install and start-up the delivery module:
1. Main unit mounting
2. Back pressure regulator mounting
3. Piping connections (hoses, injection valve,
pickup valve, back flow pressure regulator)
4. Wirings
5. Pump priming
6. Start-up
The operator must be aware of safety precautions to prevent physical injury.
Disconnect power supply before you perform
any installation or maintenance tasks. Failure to
disconnect power can result in serious physical
injury.
User health
and safety
equipment
Use safety equipment according to
the company regulations. Use the following
safety equipment within the work area:
• Helmet
• Safety goggles (with side shields)
• Protective shoes
• Protective gloves
The work
area
Observe these regulations and warnings in
the work area:
• Always keep the work area clean
• Pay attention to the risks presented by
outside gas and vapors in the work area
• Avoid all electrical dangers. Pay attention to
the risks of electric shock or arc flash hazards
• Avoid water splashes and direct sun
Power supply
disconnection