Global LP 8971-I-NP-AUT, Инструкция по эксплуатации

Страница: 25 / 55

Requirement
With the needle bar positioned 2.3mm after bottom dead centre ,
Length
A = 1.5 mm
, distance
B = 0.02
to
0.1 mm:
1.Loosen four screws 4 and turn the hook tip 2 to the needle axis.
2.Loosen the two screws 3 and displace the hook column 1 from off
the needle to the distance measure B . Tighten screws 3 .
3.Loosen screw
5
, position the needle bar and needle to the
distance measure A and tighten screw 5.
4. Check whether the hook tip 2 is positioned in the range of the needle
axis, tighten screw 4.
Adjustment
7.03.03 Needle bar height,play of needle to hook tip.
1 2
5
3
4
23