Global BH 1793, Инструкция и каталог запасных частей

Страница: 86 / 151

Mode Setting Computerized Control System for Square Buttonhole Machine
76
③
Check the changed parameters
A 、 When parameter is changed, the system will
display “Modified” key at parameter setting
interface.
B 、 In the parameter setting interface, press
【 Modified 】 to check the changed
parameters.
At first, the system will ask user to input the
password. For the operation at password input
interface, please refer to the “A” at
②
. After
inputting the right password, user can enter the
interface for inquiring changed parameters.
C 、 Under the interface of changed parameter
inquiry, user can find the list containing all the
changed parameters with their current value
and default value.
In that interface
：
z Press
【
All Rest
】
will restore all the
changed parameters to their default
values
z Click Parameter Name, like 【 Presser
Type
】
and then press
【
Select Rest.
】
to
restore this parameter to the default
value. User can select many parameters
at here.
z Press Parameter Number, like 【 U14 】 to
enter the parameter setting interface,
where user can reset the parameter
value.
z When the pages are more than one, user
can use arrow key to turn the page.
z
Press to quit the interface.
List of Level 1 Parameters
No. Parameter Range Unit Default value
U01
Presser up to maximum position
Height of maximum position of pedal operation is set. 0~17.0 0.1mm 6.mm
U02
Presser up to intermediate position
Height of intermediate position of pedal operation is
set. 0~14.0 0.1mm 6.0mm
U03
Presser lifter cloth setting position
Height of cloth at of pedal operation is set. 0~14.0 0.1mm 0
U04
Down position of 2-pedal (%)
Set the operation of the 2-pedal 5~95 1% 80%