Global BH 1793, Инструкция и каталог запасных частей

Страница: 134 / 151

Appendix 1 Computerized Control System for Square Buttonhole Machine
124
10
Appendix 1
10.1
Warning List
No. Name of Problem How to recover
E-001 Pedal not at intermediate Position Self-recovery
E-002 Emergency stop Press “Reset”
E-004 Main voltage
（
300V
）
too low Turn off Machine
E-005 Main voltage （ 300V ） too high Self-recovery
E-007 IPM over-voltage or over-current Turn off machine
E-008 Supplementary device (24V) over-voltage Turn off machine
E-009 Supplementary device (24V) low-voltage Turn off machine
E-013 Encoder error or unconnected Turn off machine
E-014 Motor running error Turn off machine
E-015 Over sewing range Turn off machine
E-016 Needle-rod upper position error
Press
E-017 Thread break detector error
Press
E-018 Knife position error Turn off machine
E-019 Emergency stop switch not at proper position Self-recovery
E-020 Confirmation of tilt of machine head Turn off machine
E-024 Panel is connected to the machine other than supposed Turn off machine
E-025 X origin detect error Turn off machine
E-026 Y origin detect error Turn off machine
E-027 Presser origin detect error Turn off machine
E-028 Needle thread trimming origin detect error Turn off machine
E-029 Bobbin thread trimming origin detect error Turn off machine
E-030 Step driver communication error Turn off machine
E-031 Step motor over-current Turn off machine
E-032 Step driver power supply error Turn off machine
E-033 Needle-rocking over range Turn off machine
E-035 Needle thread trimming motor error Turn off machine
E-036 Bobbin thread trimming motor error Turn off machine
E-037 Knife can’t return
Press
E-038 Knife sensor error Turn off machine
E-041 Stepping driver version error Turn off machine
E-042 Pattern communication error
Press