Global 1120, Руководство по эксплуатации

Страница: 17 / 62

Global Power Technologies
1120 - Class I, Division 2, Group D, T3
1 .8 Fuel Consumption
The fuel consumption of the TEG operated at rated power is shown below. The TEG can be
operated at less than rated power, down to 75% or 90 Watts.
1 .9 Boiling Temperature of Fuel
Boiling point of liquefied fuels at atmospheric pressure are:
methane - 166.5ºC (-258.7ºF)
propane - 42.1ºC (-43.7ºF)
butane - 0.5ºC (+31.1ºF)
1 .10 Installation
This generator must be installed by qualified personnel in accordance with international and/or
local electrical codes.
Carefully unpack the TEG from shipping container. Retain the shipping container until the TEG
is operational.
Identify and locate the following items from the shipping container:
A. Generator System Complete.
B. Customer Assy Kit.
Mount the TEG on a generator stand, if a stand has not been prepared, a field proven mount-
ing arrangement is shown in Figure 5. Ensure that the TEG is mounted in accordance with
following notes:
A. The TEG must be mounted with the fin duct in a vertical position.
B. The air flow through the cooling fins must not be obstructed.
C. The TEG should be mounted at a height sufficient to prevent direct flooding or heavy
snowfall from interfering with the flow of cooling or intake air.
D. When the generator is installed near a building, field experience has shown that the best
locations are on the roof or on the windward side, with a minimum distance of 3.0 meters
(10 feet) from the building. Be sure that the TEG location relative to buildings and fuel
containers are in accordance with local regulations.
FUEL CONSUMPTION
AT RATED POWER
PROPANE
C
3
H
8
BUTANE
C
4
H
10
NATURAL GAS
METHANE CH
4
LB/HR 0.54 0.54 -
GAL/HR 0.13 0.13 -
KG/HR 0.25 0.25 -
L/HR 0.48 0.42 -
CU FT/HR 4.70 3.52 13.0
CU M/HR 0.133 0.099 0.368
9