WA
TER MO
W
ATER ENHANCEMENT
17
ZeroSpot Portable Deionized Water System
3. Remove exhausted cartridge from housing. Pour out any water left inside the housing, then insert the new
cartridge. (See Fig. 5 and 6).
4. Check the housing O-ring to ensure it is properly seated in the O-ring gland, then reinstall the housing back
to the cap screwing counterclockwise. Tighten the housing with wrench. Repeat this step for other housing.
(See Fig. 7 & Fig. 8) Do not over tighten.
C. Cartridge Replacement Setup: continuation
Fig. 5
- Remove exhausted cartridge
from housing
Fig. 6
- Replace with new cartridge
Fig. 7
- Check O-ring is properly seated in
the O-ring gland
O-ring
Fig. 8
- Gasket seated on the top lid
Gasket
Fig. 9
- Reinstall the housing back to the cap
screwing counterclockwise
Counter-Clockwise
