14
ASSEMBLY AND USER GUIDE
PORTABLE DEIONIZED WATER SYSTEM
10. Check the housings O-ring to ensure it is properly seated in the O-ring gland and the cartridges gasket is
seated on the top lid, then reinstall the housing back to the cap screwing counterclockwise. (See Fig. 8.5) Check
gasket if seated on the top lid. (See Fig. 8.6) Tighten the housing with wrench. (See Fig. 8.7) Do not over tighten.
Repeat this step for the other housing.
11. Refer to Fig. 8.8 for assembled ZeroSpot
™
system. Please re-check all bolts and nuts are properly hand tight.
Please note:
garden hose and spray nozzle are not included with the system.
Fig. 8.5
- Check O-ring is properly seated
in the O-ring gland
O-ring
Fig. 8.7
- Tighten the housing with wrench
Counter-Clockwise
Fig. 8.6
- Gasket seated on the top lid
Gasket
Fig. 8.8
- Assembled ZeroSpot
™
system
