Global Truss ST-180 User Guide
Page
4
ATTACHING TRUSS
1)
Attach the STSB-006 truss adapters (Sold separately) to the
round tube mast. Tighten the tension knob on the adapter to
prevent the adapter from spinning.
2)
Attach the truss to the truss adapters and secure the truss using
the pin and cotter clips on the adjustable U brackets
LOWERING THE MAST AND TRANSPORTING THE STAND
1)
Turn the winch crank handle (H) a 1/4 turn clockwise to add
tension to the cable. Reverse the
Lifting The Mast
steps 1-6 to
lower the masts. All of spring loaded safety pins (I) must be
locked into the lowest positioning hole and tension knobs must
be tighten (G) before transporting the stand.
2)
Fold up the outriggers into the vertical position. All of the cotter
pins and slider pins must secure the leg brace slider to the
outriggers. Turn all turnbuckles clockwise to make sure that all
of the outriggers stay in the vertical position during transport
3)
Turn the winch handle clockwise (H) until there is tension on the
cable.
4) Your stand is ready for transport.
a) The steel cable must be correctly and completely rolled on
the winch to avoid crushing the fibers
The stand must be transported in the vertical position
I
H
G
I
I
G
G
