Global Truss ST-180 User Guide
Page
2
ST-180 Technical Specification
ALL SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE
SETTING UP THE STAND
1)
Place the stand in the vertical position on its wheels.
2) Ensure that the ground is firm enough to prevent the stand from
sinking. The stability of the stand is of prime importance for a
secure operation. For outdoor and indoor
use, 3/4” plywood
pads under each footplate is recommended.
3) Pull out the cotter pin (K) and unscrew the slider pin (L) to unlock
the leg brace slider(C). Lower the outrigger (F) from the vertical
position to a horizontal position
.
4) Secure the leg brace slider (C) to the hole closes to the base on
the outrigger (F). Lock the leg brace slider (C) by attaching the
slider pin (L) and cotter pin (K) to lock the leg brace slider(C) to
the outrigger (F).
5) Repeat steps 3 and 4 on all of the outriggers (F).
6) Turn the turnbuckle counter clockwise (D) to lower the footplate
(E) so that is that it is touching the ground
.
Maximum load:
200kg
440lb.
Maximum height:
5.5m
18`0”
Minimum height:
1.81m
5`11.5”
Footprint:
2.17m
7`2”
Weight:
104kg
229lb
Closed size:
1.77m
5`1”
Material:
treated steel
Finish:
Epoxy black painting / electro-galvanized
L
K
C
E
D
F
