©
Copyright of Global Telecom Corp.
6 / 14
2.3 Device Setup Using Direct Connection
Stand and extension cable is not used in this instance
2.4 LED Display
Color
Definition
Blinking Tri-color
Device self-diagnosis and ready to boot
Yellow
Device boot up in progress
Blinking Red
SIM card error detected
Blinking Green
Searching and connecting to the network
Solid Blue
LTE connected and strong Signal Strength
Solid Green
LTE connected and average Signal Strength
Blinking Yellow
LTE connected but antenna signal imbalance detected
3 Driver Software Installation
This device is intended to automatically install and register with the network without
any user interaction required. See below for specific operating system scenarios.
3.1 For Windows Users
When you plug in the device for the first time in a Windows machine, the Auto-Install
program will start running automatically. You may see some updates in your status bar.
Remote NSID appears in the network interface. Within approximately one minute the
device’s LED display should light up solid blue or solid green indicating a successful
network connection, depending on strength.
