Global Surgical SMR S 4000 Скачать руководство пользователя

Страница: 4 / 39

Section 1 Important Safety Instructions

1-1

1.1. Symbol Definitions

This symbol on the product is an attention symbol, alerting the user to read the

Owner’s Manual for important installation, operating instructions or safety information.

This symbol on the product indicates a potential electrical shock hazard and alerts the

user to read the Owner’s Manual for important safety information.

Symbol indicating an accessible location on or within the chair where there is risk that a body

part may become trapped.

ymbol indicating “not for general waste.” Recycle per the EUROPEAN WASTE ELECTRICAL

AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE

This symbol indicates earth ground.

Equipotentiality

Type B Applied Part

For Professional Use Only.

WARNING

This symbol indicates a situation in which incorrect handling through disregard of a

warning might result in death or serious personal injury.

CAUTION

This symbol indicates a situation in which incorrect handling through disregard of a

caution might result in personal injury or may result in damage to property.

NOTE

This symbol indicates a message to avoid property damage or additional information to

help complete a procedure.

WARNING

THE SAFETY AND SATISFACTION OF OUR CUSTOMERS AND THEIR PATIENTS

ARE THE HIGHEST PRIORITIES OF GLOBAL SURGICAL CORPORATION. THIS

MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE SAFE AND

PROPER USE OF THIS EQUIPMENT AND SHOULD BE READ THOROUGHLY BY

ALL OPERATORS PRIOR TO THEIR FIRST USE OF THE EQUIPMENT. FAILURE

TO READ AND UNDERSTAND THIS MATERIAL COULD RESULT IN INJURY TO

PATIENTS OR PERSONNEL OR IN DAMAGE TO THE EQUIPMENT.

We encourage our customers to recycle this product whenever possible. Disposal of this

unit must be performed in accordance with the applicable local environmental regulations.

Содержание SMR S 4000








































Результаты поиска

Содержание SMR S 4000

Отзывы:

Похожие инструкции для SMR S 4000

Бренды по названию

Популярные бренды

Global Surgical SMR S 4000, Руководство пользователя

Результаты поиска

Содержание SMR S 4000

Отзывы:

Похожие инструкции для SMR S 4000

Бренды по названию

Популярные бренды