Section 5 Care and Maintenance
5-1
WARNING
DISCONNECT ALL ELECTRICAL POWER PRIOR TO CLEANING AND
DISINFECTING. RISK OF ELECTRIC SHOCK RESULTING IN DEATH OR INJURY
IS POSSIBLE IF THE ELECTRICAL POWER IS NOT DISCONNECTED PRIOR TO
CLEANING THE UNIT.
NOTE
!
Clean and disinfect after every patient according to CDC and OSHA requirements for
non-critical devices.
5 Maintenance
The M 517HD Series has no consumable parts (i.e. fuses, filters, etc.) to replace. The only necessary
maintenance includes cleaning (paragraph 5.1) and cable management (paragraph 5.2.) Any other
maintenance or service should be performed by qualified service personnel (see section 7 for service.)
Cleaning should be performed as needed. Cable management should be performed before each use of the
microscope.
5.1 Cleaning
See M A730 Series Surgical Operating Microscope System Owner’s Manual (110-013-079) Section 6 for
cleaning and disinfecting instructions.
5.2 Cable Management
1. Ensure all cables are free from defects. Replace damaged cables immediately.
2. Route all cables in such a way that they are not likely to be pinched or stretched or otherwise damage
3. Neatly bundle cables by using the supplied cable ties and sleeving as needed.
4. Ensure all cable connections are secure.
WARNING
!
DO NOT USE AN AEROSOL SPRAY DIRECTLY ON THE M 517HD CAMERA. SPRAY
MAY CAUSE ELECTRICAL SHOCK AND/OR DAMAGE TO INTERNAL CIRCUITS
