35
NOTE: Fixed 11 Mb/s is the preferred “Value” for environments where the client has line of
sight access and is a short distance away from the AP. Fully Auto is the recommended setting
for clients that are farther away from the AP and where there may be interference between the
client and the AP.
26. Select “Use Wep”, and choose a “Value” for “128 bit”, “64 bit” or “Disabled”. (See Chapter
4-2 and Appendix B Glossary).
27. After configuration, please click “OK”.
28. Click “Internet Protocol (TCP/IP)” and “Properties” to initialize the TCP/IP Protocol.
29. If you are using a DHCP server, you can click “Obtain an IP address automatically” to get
IP from the DHCP sever. Otherwise, you must click “Use the following IP address” and key
