25
19. Select “Transmit Rate”, and choose a default value as “Fully Auto”.
NOTE: Fixed 11 Mb/s is the preferred “Value” for environments where the client has line of
sight access and is a short distance away from the AP. Fully Auto is the recommended setting
for clients that are farther away from the AP and where there may be interference between the
client and the AP.
20. Select “Use Wep”, and choose a “Value” for “128 bit”, “64 bit” or “Disabled”. (See Chapter 4-
2 and Appendix B Glossary).
21. After the configuring the “Properties”, click “OK” and continue with the Protocol Installation.
22. Please check your protocol. If it lacks TCP/IP, click “Add” to install the protocol.
