globalspecialties.com
Global Specialties
7
451-032-001_rA
Compliance and Certifications
This product meets the essential requirements of the applicable European Directives as
follows:
CE Compliance
This product is subject to Directive 2012/19/EU of the European Parliament
and the Council of the European Union on waste electrical and electronic
equipment (WEEE), and in jurisdictions adopting that Directive, is marked as
being put on the market after August 13, 2005, and should not be disposed
of as unsorted municipal waste. Please utilize your local WEEE collection
facilities in the disposition of this product.
*Applicable in the European Union and other European countries with separate collection
systems.
•
2014/30/EU: Electromagnetic Directive (EMC)
•
2014/35/EU: Low Voltage Directive (LVD)
•
Standard IEC 61010-12011/65/EU + AMD2015/863: Reduction of
Hazardous Substances Directive (RoHS 2) ANNEX III Exemption 6(c)
The PB-503A Circuit Design Trainer is a versatile, time-saving tool for circuit designers,
engineering technicians, students, and hobbyists. A large breadboard area and a wide choice
of built-in circuit accessories allow rapid and accurate construction of virtually any type of
analog or digital circuit.
Circuit power is provided by three power supplies, two variable and one fixed. The circuit
breadboard area includes over 2500 contact points. A multiple-waveform digital function
generator supplies sine, triangle, and square wave output for analog circuits. A built-in speaker
may be used for analog output.
Outputs also include a TTL-level square wave generator, two debounced pushbutton switches,
and a bank of eight logic switches. Eight logic indicators may be used to display high and low
logic levels. Two built-in potentiometers and two SPDT switches are provided for circuit control
and adjustment. Connections to external test equipment or signal sources may be made using
the two BNC connectors on the front panel.
Introduction
Disposal*
