Global Special Effects | All Rights Reserved www.GlobalSpecialEffects.com | 256-229-5551
5
In order to create a beautiful and entertaining Evaporative Snow® fall, please ensure the safety of all
Operators, participants, and machines. Follow these instructions carefully.
1. Always prepare your snowfall area making sure it is dry and free of obstructions. Note that if the
snowfall surface area is linoleum or smooth the floor may become slippery.
2. Place the Magic Lamp LITE on a secure, dry, and level surface. Keep the Magic Lamp LITE
unplugged from the electrical outlet while placing the machine in the desired location. Do not
operate the Magic Lamp LITE from a wet surface.
3. Prepare the snow solution in the built-in fluid reservoir. Pour (1) 2 oz. bottle of SMF-2C
Evaporative Snow® Concentrate into the reservoir then add 1/2 gallon of water. We recommend
using distilled or deionized water for best results. The cleaner the water, the prettier the snow!
4. Reattach the cap on the fluid reservoir, turn in a clockwise direction, and tighten.
GENERAL OPERATING INSTRUCTIONS
FLUID
CONTROL
POWER
SWITCH
FUSE
FLUID
RESERVOIR
5. Connect desired power cords to an electrical outlet. The switch and power cord on the front of the
Magic Lamp LITE are for the snow machine element while the switch and power cord on the side
of the Magic Lamp LITE by itself are for the lamp lighting element. The separate switches and
power cords allow the snow machine and lamp lighting element to be used independently of
each other, as well as used simultaneously to achieve the desired effect.
