1
. Power On
(1).
Bluetooth earpiece:
Please refer to earpiece related user manual. (Normally press power on/off button for 2~3s, until the
indicator flash), then release the button.
(2).
PTT remote controller:
In the power off state, long press “PTT” button for 3s, once see blue LED indicator flash release the
button, it will power on successfully.
(3).
Bluetooth dongle:
First make sure the two way radio is in power on state, then with the Bluetooth dongle in power off state,
long press dongle’s “power on/off” button for 3 seconds, until blue LED indicator flash, then release the
button, dongle will power on successfully.
2. Power off
(1).
Bluetooth dongle:
Bluetooth dongle will auto power off when either two way radio phone or Bluetooth
earpiece powers off. (The power off operation of two way radio phone and BT earpiece,
please see the user manual of corresponding device)
(2) PTT remote controller:
PTT remote controller will power off automatically after Bluetooth dongle power off 5
minutes.
3 Pairing
(1). Pair Bluetooth dongle and earpiece
. Refer to earpiece user manual, earpiece into paring model.
. In the two way radio power on state, make sure the radio dongle is powered off(If dongle is not in
power off state, please detach the dongle then re-insert into the radio to power it off), then long press
Bluetooth dongle power on/off button for 8s, LED indicator into red and blue alternate flash quickly, now
the Bluetooth dongle in the paring mode, and it will search for Bluetooth earpiece to pairing with .
. When both Bluetooth dongle and earpiece indicators turn from red and blue alter flash quickly to blue
flash, it indicates that the paring have been successfully accomplished. (press the other radio PTT button
to talk, if paring successful earpiece can hear the talking voice)
(2)
.
Pair Bluetooth dongle and PTT remote controller.
Note: Please power off the paring successful earpiece before PTT remote controller pairing.
. In the two way radio power on state, make sure the radio dongle is powered off(If dongle is not in
power off state, please detach the dongle then re-insert into the radio to power it off), then long press
Bluetooth dongle power on/off button for 8s, LED indicator into red and blue alternate flash quickly, now
the Bluetooth dongle in the paring mode, then short press power on/off button again, the dongle will turn
into red/blue slow alternate flash. Bluetooth dongle into the paring mode for pairing with PTT remote
controller.
. In the power off state of remote controller(if the remote controller not in power off state, charge reset
it to power off), long press the PTT button for 20s, until red and blue indicators flash quickly, into pairing
mode.
. When both Bluetooth dongle and remote PTT controller exit from red and blue alter flash state, it
indicates that the paring have been successfully done. (press remote controller PTT button, if Bluetooth
