GETTING STARTED
Battery Installation:
Your COMMUNICATOR is powered by a Lithium-Ion BATTERY (included).
To install and replace the BATTERY
:
1. Release the BATTERY COMPARTMENT COVER LATCH located on the rear side of the
unit, and remove the BATTERY COMPARTMENT COVER.
2. Install the Lithium-Ion BATTERY into the BATTERY COMPARTMENT. Be certain to
follow the correct orientation in the compartment. A battery installed incorrectly can
prevent the unit from operating.
3. Replace the BATTERY COMPARTMENT COVER and lock the BATTERY
COMPARTMENT COVER LATCH into position.
NOTE:
If you install/replace the BATTERY and the LCD Screen remains blank for more
than 3 seconds, press and hold the POWER/MENU button for 1 second to start
WATCH mode.
5
CAUTION
To reduce the risk of personal injury, use only the battery listed in the
Owner’s Manual. The COMMUNICATOR has a built in POWER SAVER
feature for maximum battery life. But when the COMMUNICATOR is not
being used, conserve battery power by pressing the POWER/MENU button to
turn OFF the unit. Remove the BATTERY if the unit will not
be used for a long period of time.
BATTERY
COMPARTMENT
COVER
BATTERY
COMPARTMENT
COVER LATCH