Page | 8
TROUBLESHOOTING GUIDE
Before any troubleshooting commences make sure the battery has a full charge!
(1)
Does the lift raise or lower
NO
(a)
Check the battery connection and reconnect
(b)
Check hand controls, make sure they are connected properly
(c)
Check for any lose wires on the control compartment
(d)
Check the connection cable for damage
(2)
Did the lift stop moving over water and is stuck?
Yes
(a)
Have a person or attendant push the emergency return button
(b)
The button is located under the main controls on the lift. It is orange
in color.
(c)
The emergency button overrides the hand controls in case they have
failed.
(d)
If the above does not work then recheck the battery, battery
connection or the controls are not connected properly.
