Safety Points
Please read these instructions fully.
Do not operate near water or where there is a risk of spilling any liquids into the
units.
Remove the units from the power supply or wall plug before cleaning.
Clean with a dry cloth.
Do not place near any heat source. (e.g. Radiators, Stoves or any other equipment
producing heat)
Do not block ventilation holes and operate in the recommended orientation.
Do not insert any objects into ventilation holes that might touch circuit voltage
points or areas that might cause electrical shock.
Only use the AC power adaptors supplied. Use of other power supplies may cause
malfunction or permanent damage.
Do not use an AC power supply if there are any signs of damage to case or wiring.
Do not handle the units or power adaptors with wet hands.
Disconnect the AC power adaptor from the mains when not in use.
Mounting Configurations
In whatever mounting configuration adopted, care must be taken to ensure the
units are placed in a safe and secure position.
Do not place the units in any position where the cables and wiring may become
entangled or cause a trip hazard
Page 10
There are three possible mounting configurations for the HD Video Streamer:
Vertical Mount
using the supplied base stand. This is the recommended orientation for
maximum coverage.
Horizontal Mount
: The unit has rubber feet to protect mounting surface. It is advised
that the unit should not be placed on other electrical equipment or performance could
be affected.
Wall Mount:
Using the supplied bracket, the unit can be mounted on a wall or other
vertical surface. Slide the unit into the bracket from the side
