3.
Attach Elevation Bracket (3) to Antenna Bracket
(2) using 4 off M6x16 cup square screws (12) & M6
nuts (10).
4.
Insert L Tube (5) into Wall Mount Bracket (6) & secure using 2 off M6 U Bolts (14) & 4
off M6 nuts (10). If the horizontal angle of the antenna from the wall is b/- 55°
then the short end of the L Tube should be fixed to the wall mount, if the angle is to
increase above 55° (+/-90°) then the long end should be fixed to the wall mount.
5.
After the Wall mount has been fixed to the wall, clamp the dish assembly to the wall
mount assembly using 2 off M6 U Bolts (14) & 4 off M6 nuts (10).
