3
Hand Crank Adjustable Workbench
7) Please insert 8 M6*10 machine screws (Ref 21) through the holes in each crossbar end (Ref 5) going
into the Center Rails (REf 6) and tighten the screws. Then insert x2 M4*6 machine screws (Ref 24) into
the Rotating Bar (Ref 7) and tighten as shown. Insert the Handlebar (Ref 10) into the Handle Holder (Ref
9). Then insert x2 M4*6 machine screws (Ref 24) into the Handle Holder (Ref 9) and tighten them.
8) Attach the Short Rungs (Ref 11) to the Leg with x4 M6*10 Furniture Scerws
(Ref 25). Then attach the Long Rung (Ref 12) to the SHort Rungs (Ref 11) with
x4 M6*16 Machine Screws (Ref 21) and x4 Butterfly Nut M6 ( Ref 26).
9) Attach a foor (Ref 3) with x4 M6*16 machine screws (Ref 22) into each
Legs and tighten screws. Connect x2 glides (Ref 4) together into each foot,
10) Turn the table over.
6) Place the table under the accessories and place it in the corect position. Then attach
the Handle Holder (Ref 9) to the Table Board with x4 M5*16 wood screws (Ref 23) and
tighten them.
Then connect the Table Board to the desk frame with x6 M5*16 wood screws (Ref 23)
and tighten them.
User Manual
