Global Industrial 412584, Руководство пользователя

Страница: 16 / 33

16
Stainless Steel Drum Scale
Table5-2: use LB as primary unit:
Calibration
division value
Display division value in different weight unit that can be used
kg g lb oz lb:oz
0.0001lb Not available Not available 0.0001lb 0.002oz Not available
0.001 lb
0.0005 kg 0.5g 0.001 lb 0.02oz Not available
0.01 lb 0.005 kg 5g 0.01 lb 0.2oz 0.2 oz
0.1 lb 0.05 kg 50g 0.1 lb 2oz 2 oz
1 lb 0.5 kg 500g 1 lb 20oz Not available
10 lb
5 kg Not available 10 lb Not available Not available
0.0002 lb 0.0001 kg 0.1g 0.0002 lb 0.005 oz Not available
0.002 lb 0.001 kg 1g 0.002 lb 0.05 oz Not available
0.02 lb 0.01 kg 10g 0.02 lb 0.5 oz 0.5 oz
0.2 lb
0.1 kg 100g 0.2 lb 5 oz Not available
2 lb 1 kg Not available 2 lb 50 oz Not available
20 lb 10 kg Not available 20 lb Not available Not available
0.0005 lb
0.0002 kg 0.2g 0.0005 lb 0.01 oz Not available
0.005 lb
0.002 kg 2g 0.005 lb 0.1 oz 0.1 oz
0.05 lb 0.02 kg 20g 0.05 lb 1 oz 1 oz
0.5 lb 0.2 kg 200g 0.5 lb 10 oz Not available
5 lb 2 kg Not available 5 lb Not available Not available
50 lb
20 kg Not available 50 lb Not available Not available
ZERO
If the display does not show 0, and there is no an object on the platform, press the
ZERO/ON/OFF key to zero the reading.
Zero range: ±2% * full Capacity.
The zero function is unavailable when the displayed reading is out of the zero range and
the indicator will show the error message
0
﹉ ﹉﹉ ﹉﹉ ﹉
or 0
﹍ ﹍﹍ ﹍﹍ ﹍
, meaning the scale is over or
under zero range
Setting a Tare Weight
1. Zero the scale as described above.
2. Place an empty container on the platform, press the TARE/PRESET key. The display
will return to zero, eliminating the weight of the contain
er. “
NET
”
will be lit on the display.
3. Place the material or object to be weighed in the container. The net weight will be
displayed.
4. To exit tare mode, remove all weight from the scale. The display will show a negative
weight. Press the TARE/PRESET key to return the display to zero.
Setting a Pre-Determined Tare Weight
1. Zero the scale as described above.
2. Press and hold the TARE/PRESET key until “ Pr.Tare
” is displayed, then the tare weight
will be displayed. The first digit and NET will flash in the display.
3. Input the tare weight using the keys. After inputting the tare weight, press
the TARE/PRESET
key to confirm. “
NET
” will be lit in the display.
User Manual