CAUTION:
• Turn power supply off before installation.
• Make sure the power supply cable does not contact the top surface of the heater during operation.
• Heater must not be located immediately below a socket outlet. Electrical connections must be made
outside of the footprint of the unit to avoid heat build-up. If the heater is to be mounted on an incline
(e.g. sloping roof), ensure the electrical connection is located below the lowest end of the heater.
• Joists, beams and rafters shall not be cut or notched to install the appliance.
• This heater is not intended for ceiling-recessed installation.
• The identification mark and model reference should be visible after installation.
• DO NOT install facing or close to any combustible material.
• The fixed wiring insulation coming into contact with parts with a temperature rise of greater than
122°F must be protected, for example, by sleeving having an appropriate temperature rating.
REMOTE CONTROL:
Insert 2 x AAA Alkaline batteries (not included) into the remote control .
Remote Control Functions:
1.
Power Button:
Turns heater on/off.
2.
Up Button:
Increase heat level or timer hours.
When heater is off, this button turns heater on at low heat level.
3.
Down Button:
Decreases heat level or timer hours
When heater is off, this button turns heater on at high heat level.
4.
Heat Level Button:
Press to enable heat level adjustment; then
press “up” or “down” buttons to choose either high or low heat level.
5.
Timer Button:
Press to enable timer adjustment; then press “up” or
“down” buttons
to set the timer from 00
– 24 hours.
& 3 to the number of hours you would like to set.
Note:
All 246719 Global Industrial heater remote controls have the
same frequency, so it is possible to control several heaters with just
one remote.
