Global garden products MJ66, Руководство по ремонту

Страница: 27 / 88

MAP
1 / 2
4.5.
1
DRIVE PEDAL ADJUSTMENT
General informations
This operation should be carried out every time the
rear axle, the pedal or the control rod is removed in
order to get the correct travel for the pedal and to en­
able reaching the envisaged speeds both forwards
and in reverse.
Related topics
[ 5.1] Removal of steering column covers
[ 5.6a] Removal of the rear axle
[ 7.10] Fitting safety microswitches
Hydrostatic drive models
• Remove the steering column’s rear guard.
A) Adjusting the pedal in the “neutral” position
Regulating consists in adjusting the position of the
pedal (4) with the hydrostatic group lever (3), which
is brought to the forward maximum speed position by
a spring.
To reach the forward and reverse speeds set (thus
establish the pedal’s “neutral” position), the edge of
the reverse gear pedal (5) at rest must be 25 mm from
the footplate with the hydrostatic group lever (3) on
“neutral”.
This is obtained by placing a block (6) under the pedal
(5) and working on the nuts (7) until the desired situa-
tion is reached. Taking care not to change the position
of the lever (3) by mistake during adjustment.
MODEL YEAR 2015
MJ66-Hy MJ66
WORKSHOP MANUAL
BACK