Global garden products 72FL Hydro, Руководство по ремонту

Страница: 26 / 69

© by GLOBAL GARDEN PRODUCTS
72FL hydro
4.10
.
0
ADJUSTMENT OF THE COLLECTOR CHANNEL GUIDE
씱 씱
씱 씱
씰 씰
씰 씰
1 / 1
쑮 쑮 쑱 쑱
WORKSHOP MANUAL
pag.
MODEL YEAR 2016
3/2015
4.10 ADJUSTMENT OF THE COLLECTOR
CHANNEL GUIDE
This adjustment is to be made after any work on the
collector channel guide and if the rear plate has
been dismantled.
The importance of this adjustment is in avoiding that
incorrectly inserting the channel opening in the hole
in the plate prevents the wheels cover [see 2.5] from
closing properly which could let grass cuttings get
into the engine housing causing damage.
Fit the channel [see 5.5].
Take the cutting deck to position «1». In this condition,
the channel (1) should be properly sitting in the guide
(2).
If the guide is lower or tends to raise the channel too
much, loosen the screw (3) and make the guide slide
until it is repositioned correctly.
Always check that, when the wheels cover is closed
according to the regular procedure [see 2.5], the
channel always inserts in the hole of the plate regu-
larly and automatically, and with no need to help it in
manually.
1 2
3
3
2
30 mm
~ 3 mm
<= ...BACK... <=