© by GLOBAL GARDEN PRODUCTS
72FL hydro
6.3
.
0
REPLACEMENT OF THE STEERING COMPONENTS
1 / 1
쑮
쑮
쑱
쑱
WORKSHOP MANUAL
pag.
MODEL YEAR 2016
3/2015
6.3 REPLACEMENT OF THE STEERING
COMPONENTS
A) Dismantling the pinion and the ring gear
Follow the same procedure as that for adjusting
free play [see 4.6].
B) Dismantling the steering shaft
After having dismantled the pinion and the ring gear
as described at point “A”, take out the snap ring (1)
from its seat in the shaft (2) and extract the shaft from
the bushings (3) pulling it downwards.
After having refitted all the components it will be ne -
cess ary to …
Adjust the free play between the pinion and the
ring gear [see 4.6], remembering that with a
new pinion and ring gear it is not necessary to
insert spacers in-side the hub.
Check the toe-in and the alignment
of the steering wheel [see 4.7].
2
1
3
<= ...BACK... <=
