GLOBAL DIAGNOSTICS MICRO SHAKE 1200 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 25

background image

F12, User Manual, V2 12.2020

MICRO SHAKE 1200

Page 8 of 25

4. PACKING, TRANSPORT AND STORAGE

4.1. GENERAL WARNINGS

Instrument has to be decontaminated before packing for transportation.

4.2. PACKING

Packaging is needed whenever it is to be transported or shipped by courier or other means.

To pack the instrument follow the instructions as below described:

•

Decontaminate the instrument as explained in chapter No. 13 (Decontamination) of
this manual.

•

Place the instrument into the original packaging box; Instrument has to be properly
protected by plastic protective material. Put copy of safety clearance certificate
(copy of Safety Clearance certificate is attached at the end of this manual)

•

Mark the package with address, instrument identification and warning Labels.

4.3. INSTRUMENT TRANSPORTATION

The transportation of the instrument in unpacked condition must be limited within the room where it
is used, to avoid damage.

4.4. STORAGE OF THE INSTRUMENT

Before storing the instrument for a long period, pack it carefully as described above and store indoors.

Relative humidity has to be less than 85%, and temperature between 0ºc and 50ºc.

«
...
6
7
8
9
10
...
»

Содержание MICRO SHAKE 1200


























Отзывы:

Нет отзывов

Похожие инструкции для MICRO SHAKE 1200

Бренд: Taurus Страницы: 28

Бренд: Kärcher Страницы: 54

Бренд: ABB Страницы: 85

MicroVersaTrip Plus

Бренд: GE Страницы: 20

Бренд: GE Страницы: 252

Бренд: Balanced Body Страницы: 12

Бренд: Eagle Pro Страницы: 6

Бренд: GE Страницы: 10

Бренд: DARAY Страницы: 28

Бренд: MacDon Страницы: 88

Бренд: Jiffy Страницы: 15

Бренд: ICS ELECTRONICS Страницы: 6

Бренд: Cadman Страницы: 66

Бренд: Keithley Страницы: 42

Бренд: Fisher Scientific Страницы: 42

Бренд: Echo Страницы: 6

Pro Attachment Series

Бренд: Echo Страницы: 28

Бренд: Echo Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды