Page
•
globalcontract.com
4
• March 2019
GLOBAL
Contract
USER GUIDE
Calibrate
Upper Limit
Lower Limit
Units
if the height reading displays incorrect height, the height from the table top
needs to be calibrated.
Measure the distance between the floor and the top of the table top.
Set an Upper Limit when planning over-head storage.
Set an Lower Limit when planning storage under the table.
Change between metric or imperial units.
or
or
or
Change the current height reading by
using the Up or Down button to the
measured height.
Store the current height reading and
return to Menu by pressing the m button.
Select by pressing the M button.
Select by pressing the M button.
Select by pressing the M button.
Select value and return to Menu by press-
ing the M button.
Select value and return to Menu by press-
ing the M button.
Select value and return to Menu by press-
ing the M button.
Press and hold M button for at least 8
seconds...
... until three dashes are displayed.
Press and hold M button for at least 8
seconds...
... until three dashes are displayed.
Press and hold M button for at least 8
seconds...
... until three dashes are displayed.
Calibrate Upper Limit by using the Up or
Down buttons.
Calibrate Upper Limit by using the Up or
Down buttons.
Choose CM (centemeter) or “ (inch) with
the Up or Down button.
Press the “M” button for at least 8
seconds...
...until three dashes are displayed.
Select by pressing the M button.
M
M
M
M
M
M
M
M
M
M
M
M
Release the M button.
Release the M button.
Release the M button.
Release the M button.
Use the Up or Down button to navigate
to U.L. (Upper Limit)
Use the Up or Down button to navigate
to L.L. (Lower Limit)
Use the Up or Down button to navigate
to Un (Units).
Use the Up or Down button to navigate
to CAL (Calibrate)
Release
Release
Release
Release
CM or “
U.L.
L.L.
