Push the LAP/RESET button once, and the digits will stop flashing. (If you do not push
the LAP/RESET button to stop the flashing, the digits will stop flashing automatically after
2 minutes.)
To activate the start of the countdown when you need it, push the START/STOP button
once.
HOW TO USE THE STOPWATCH
1. Repeat Pressing the MODE button to show
STOPWATCH
on the display.
2. To start the Stopwatch press the START/STOP button. The Stopwatch will start
keeping time and the Icon (symbol at the top of the display) will flicker to show the
action.
TO STOP THE STOPWATCH, press the START/STOP button. Pressing the
START/STOP button again will start the stopwatch running from where it last left off. The
Stopwatch can count up to
23
hours,
59
minutes and
59.99
seconds. Each hour
accumulated shows at the top left of the display.
To RESET the stopwatch to zeros, press the LAP/RESET button, when it is in a stop
position.
Split Timing on Stopwatch
1. Start the Stopwatch by pressing the START/STOP button. The stopwatch will start
keeping time.
2. Press the LAP/RESET button. The watch will continue counting the time even though
you do not see it on the display. The Icon at the top of the display will continue to flicker
to show action and that counting continues.
3. Press the LAP/RESET button again and the display will change and show the time that
has accumulated in total.
To RESET the Stopwatch, press the START/STOP button and then press the
LAP/RESET button.
HOW TO SET THE SECOND CLOCK
1. Repeat Pressing the MODE button to show
SECOND CLOCK
(T2)
2. Press & Hold the LAP/RESET button until the Hours digits BLINK.
Press the START/STOP button to rotate to the hour you wish to set. (In
12
Hr Mode,
use
PM
indicator for correct setting of afternoon or evening.)
3. Press the LAP/RESET button when desired hour has been set.
NOTE: Only the hour can be set in second clock mode. (The minutes and seconds will
be the same as the Calendar Clock)
HOW TO USE THE EL BACK LIGHT
Press the LIGHT button to light up the LCD display at any time. The screen will be lit for
approximately 3 seconds before going off automatically.
The EL back light will flash when an alarm is activated