4. Press the LAP/RESET Button when
finished. The display will stop blinking.
The set icon will show on the display.
Your alarm is set.
When
A1
Alarm is set the icon shows
beside the
PM
indicator under
Alm1
.
When
A2
Alarm is set the icon shows on the display beside the
A1
icon under
Alm2
.
Note
: Calendar Clock Time must be set for Alarm Time activation to be correct.
HOW TO TURN ON AND OFF THE HOURLY ALERT
Note
: Hourly Alert is a short single reminder
1. Repeat Pressing the MODE button and
select
either 1st ALARM=A1 or 2
ND
ALARM=A2
2. Repeat Pressing START/STOP button
until the Hourly Alert indicator (located
beside the Alm2 indicator) shows on the
display. Hourly alert is on when icon shows.
Hourly alert is off when icon doesn‟t show.
ON/OFF SETTINGS OF ALARMS
Note: To turn on or off First Alarm you must be in the
A1
mode.
To turn on or off Second Alarm you must be in the
A2
mode
.
Repeat Pressing the MODE button to show
alarm you wish to turn off or on: 1ST OR
2ND ALARM.
Repeat Pressing the START /STOP button to rotate, alarm on (hourly alert) & alarm off.
When Icon(s) shows, alarm is set. Alarm is off when icon does not show. (See previous
illustration)
HOW TO ACTIVATE OR DEACTIVATE VIBRATION AND BEEP FUNCTION
1. Repeat Pressing the MODE button to the
CALENDAR CLOCK
mode.
2. Repeat Pressing the START/STOP button to
rotate through the selection of settings. When
a function is activated, its respective icon will
be highlighted, at the top right corner of the
display. Rotation will be: Vibration ON, Beep
ON, Vibration and Beep ON, Vibration & Beep
OFF. Select one of the four functions that you desire.
This can be changed at anytime by following steps 1 and 2.
Alarm will stop automatically after approximately 20 seconds. To stop alarm before the
automatic stop, press any button.
NOTE:
To check setting the watch is in at any time,
press the MODE button. With each press of the button the vibration and/or beep will
respond if set.