Global American 3308290, Руководство пользователя

Страница: 79 / 105

5.2.1 Installation Notices
WARNING:
The installation instructions described in this manual should be
carefully followed in order to prevent damage to the 3308290 and its
accessories, and prevent injury to the user.
Before and during the installation please DO the following:
„
Read the user manual:
o
The user manual provides a complete description of the 3308290
installation instructions and configuration options.
„
Wear an electrostatic discharge cuff (ESD):
o
Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.
„
Place the 3308290 on an antistatic pad:
o
When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.
„
Turn all power to the 3308290 off:
o
When working with the 3308290, make sure that it is disconnected from
all power supplies and that no electricity is being fed into the system.
Before and during the installation of the 3308290 DO NOT do the following:
„ DO NOT
remove any of the stickers on the PCB board. These stickers are
required for warranty validation.
„ DO NOT
use the product before verifying all the cables and power connectors
are properly connected.
„ DO NOT
allow screws to come in contact with the PCB circuit, connector pins,
or its components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the 3308290 is properly installed.
Page 79