Check error
•
If one FLEX GEAR does not operate
①
Auto fuse (circuit breaker) check: Check if the auto fuse (circuit breaker) located at
the top of the FLEX GEAR protrudes. (YES=Extrude / NO=ExtrudeX)
②
Manual operation check: Use a flat-head screwdriver to turn the slotted groove of the
FLEX GEAR to check whether it operates manually. (YES=Manual operation /
NO=Manual operation not possible) **Strong force may be required**
③
Cable check: Check if the cable connected to the bottom of the FLEX GEAR is
disconnected or missing. (YES=no problem / NO=disconnection or missing)
④
Control box LED check: Check if the LED of the control box is normally displayed
according to the operation status of the FLEX GEAR.
⑤
Cross test: Test the left and right FLEX GEAR cables connected to the control box by
crossing them.
- If the opposite FLEX GEAR does not work after crossing, replace the control box.
- If the faulty FLEX GEAR still does not work after crossing the PCB or Replace
the limit sensor.
26
Error
1. Check auto fuse
(Circuit breaker
)
2. Check manual
operation
3. Check cable
4. Check control
box LED
NO
YES
Gear disassembly
Cable
reconnection
NO
5. Cross check
Change control
box
Change PCB or Limit
sensor
2. Check manual
operation
NO
YES
NO
YES
YES
