Indian
Bolt A
:
M8 35mm hex socket head Bolt
Bolt C
:
M8 25mm hex socket head Bolt
16
ⓐ
ⓓ
ⓒ
ⓔ
Bolt D
:
M10 55mm / hex socket head bolt +
Bolt E
:
M10 10mm hairless wrench bolt Bolt +
Bracket cover
Bolt F
:
M6 10mm round head bolt
Spring washer
ⓑ
Bolt B
:
M8 30mm hex socket head Bolt
ⓕ
Bracket parts
Mount bracket
Middle bracket
Sliding bracket
3
5
1
2
6
Use the bolt hole (red circle) where you removed
the bumper. To further secure the FLEX GEAR
bracket, use a drill and tap to drill additional holes in
the yellow hole locations on the motorcycle frame.
Install the bracket with a total of 3 bolts.
※
Required.
Remove the motorcycle's bumper to install the
FLEX GEAR in the motorcycle's bumper position.
Remove the seat of the motorcycle
Connect ‘Middle bracket’ and
‘Mount bracket’ using ‘Bolt B’.
7
Connect the assembled bracket
using ‘Bolt A’ to the location where
the motorcycle bumper was
removed.
Connect ‘Sliding bracket’ to ‘Middle
bracket’ using ‘Bolt C’.
※
Bracket modeling is subject to change due to design modification.
※
Bracket bolt dimensions are subject to change due to modeling
modifications.
