Gliderol Glidermatic GTS 2000, Руководство пользователя

Страница: 18 / 28

18
Limit Setting
Option 2: Transmitter
Procedures
(i) Press and hold S1 + S3 for two seconds to initiate learning mode (3 beeps)
(ii) Using buttons S2 & S3, locate TOP position
(iii) Press S1 to confirm TOP position (2 beeps)
(iv) Using buttons S2 & S3, located BOTTOM position
(v) Press S1 to confirm BOTTOM position (2 beeps)
(vi) Controller will initiate checking process for both TOP and BOTTOM positions
Note:
1.All steps must be carried out to restart learning process. For example, if a mistake is made
when learning the TOP position after confirming, all of the subsequent steps must be carried
out prior to relearning the TOP position again.
2.When setting the TOP position, an overload sensing feature is built in to prevent damaging the
control gear.
S1
S2
S3