Fix the Motor clamp as shown:
If the Pillar is Iron, weld supporting clamps. If Concrete use Anchor Bolts.
1. Release the GEAR MOTOR ARM. OPEN both gates.
2. Extend the Lever Arm fully outwards, by rotating the Arm Extension.
3. Rotate the Arm Extension one turn clockwise.
4. Mount the Base bracket to the pilar, corresponds to horizontal section of the gate.
using water level. Fix with anchor bolt. Attach Tail Plate with 2 bolts.
6. Screw the Motor Arm to this Tail Plate. Then spot weld the END Clamp to the
gate. See that the Motor arm is horizontal.
5. Ensure the gate can be opened and closed fully.
6. Weld the End Clamp strong. And install second motor like this.
7. CLOSE both gates.
SOLAR Back Up:
