Installation of EM Lock.
EM Lock is generally fixed to the Gate Leaf, which needs to travel more than other.
If same, it can be fixed to the gate near control box, so as to reduce wiring. Motor in
the Gate Leaf with lock is termed as M1, and other M2.
Close the gate properly and fix the LOCK BASE to the ground so that both leaves
are blocked in the upper rubber part of the base. Fix it firmly to ground.
Lock is screwed to a base plate, which is to be welded to the gate tip. Unlock EM
Lock and place it in the tip ( Fig ), so that the lock lever just moves above the base.
Bottom. It should locked into the base while closing and gets released while
opening.
Manual release system.
Connections:
Give connection to Motor1, Motor 2 and EM Lock as shown.
Connect the Battery terminals (optional) and Power the system.
Connect IR Photocell & Flash (optional)
