Fold Down Backrest
Your chair is fitted with a fold down backrest. To fold down do the following:
1. Remove seat cushion.
2. Position chair so that back of chair is facing you.
3. By using thumb depress button on back of backrest side hinge plates.
4. With button depressed use forefinger to push lever outwards (wheel side)
5. Backrest will now fold down onto the seat.
6. To reposition backrest ready for use it is the reverse of points 5 to 1.
Adjustable Angle Footplate
Your chair is fitted with an infinitely adjustable angle footplate. To adjust do the
following:
1. Lift front of chair up until you can clearly see the series of clamps under the
footplate.
2. Loosen screws on one side of clamps only
3. Move footplate to desired position
4. Retighten screws in clamps
Adjustable Height Footplate
Your chair has an incrementally adjustable height footplate. To adjust do the
following:
1. Loosen footplate clamps as per points 1 & 2 of above procedure.
2. Undo and remove screws on the rear of front chair frame.
3. Move footplate to nearest hole to suit desired position.
4. Replace screws and tighten firmly
5. Reposition footplate as per above procedure
Rear Wheel Position
The position of the rear wheels can be set up to suit your ability.
WARNING: By
moving the wheels forward it reduces the stability of the chair and makes it tip
up easily. Caution should be taken when using the chair in this configuration.
To adjust do the following:
1. Remove Quick release wheels.
2. Loosen the 4 screws on each axle mounting plate.
3. Move to desired position. Ensure that both axle-mounting plates are
positioned evenly along the side frame.
4. Retighten the 4 screws on each axle mounting plate. Ensure that these are
tightened evenly as uneven tightening will change the camber position of the
wheels.
5. Refit rear wheels and check that camber angle is equal on both sides.
Loosening and tightening the 4 screws on each axle mounting plate can make
small adjustments. When wheels are equal ensure screws on each axle
mounting plate are tightened very firmly.
