manualshive.com logo in svg

Glide NipperGlide, Руководство пользователя

Поделиться
Скачать
Glide NipperGlide Скачать руководство пользователя страница 4

PAGE 4

SECTION 1  

I

  INTRODUCTION 

Thank You For Choosing The   
Nipperglide Wheelchair

Thank you for choosing the Glide Rehabilitation Products NipperGlide Wheelchair. An Australian 
designed and manufactured product which complies with AS 3695 and EN 12183 Standards 
(Type B classification) and has a manufacturers recommended user weight of 100kg for standard 
G1 and G3. 180kg recommended maximum user weight for Heavy Duty G3 wheelchair. With 
proper care and operation, your G1/G3 chair will provide years of trouble free use. 

Please take the time familiarise yourself with the functions and features of your chair by reading 
this owner/user manual. If you have any queries about the functions of the  chair you can call 
Glide Rehabilitation Products or your nearest Glide Rehabilitation Products dealer.

!

Warning.  Means you must read.
If you have a Vertical Lift model, it is essential you  
read and fully understand Section 11 before use.

Содержание NipperGlide























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды