manualshive.com logo in svg

Glide NipperGlide, Руководство пользователя

Поделиться
Скачать
Glide NipperGlide Скачать руководство пользователя страница 20

PAGE 20

IMPORTANT

Lendal Pty Ltd (trading as Glide Rehabilitation Products) does not warrant either expressly or 
impliedly the suitability of the product for the purchaser or any intended user. Purchasers and 
intended users are advised that advice from an appropriate registered medical practitioner 
should be obtained prior to using the product.

Except insofar as is prohibited by statute, Lendal Pty Ltd shall not be responsible for damage, 
injury or loss of any kind to any property or person howsoever caused arising from or in 
connection with the product. All conditions and warranties that (but for this provision) would be 
implied in favour of, and all rights and remedies that (but for this provision) would be conferred 
upon the purchaser or other persons against Lendal Pty Ltd arising under or as a result of the 
Trade Practices Act 1974, any other legislation or the general law are excluded and limited 
to the maximum extent possible and in cases where Lendal Pty Ltd’s liability cannot be 
completely excluded but may be limited, the liability of Lendal Pty Ltd is limited to one of the 
following (at the option of Lendal Pty Ltd) 

(a)  The replacement of the product or the supply of an equivalent product

(b)  The repair of the product

(c)  The payment of the cost of replacing the product or of acquiring an equivalent product

(d)  The payment of the cost of having the product repaired

Warranty could be voided if chair is not returned to Glide Rehabilitation Products or  
authorized agent for it’s free service within 3 months of purchase date.

Содержание NipperGlide























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды