Glide G2 Series, Руководство пользователя

Страница: 15 / 20

OPERATING INSTRUCTIONS
The ESCOOTER
scooters driving system consist of four main compo
nents:
Battery
Controller
Throttle
Motor
When the throttle is twisted, a signal goes to the con
troller, relevant to the angle of turning. Then the con
troller draws from the battery current, relevant to the
required speed, controlled by the throttle and the
power necessary to start the scooter or drive it uphill.
The higher the driving speed is and the steeper the hill
is, the lower the range of the ESCOOTER is. A second
battery can be connected to the extra battery cable to
extend the range.
The main breaker under the seat works as a high current
protector. 48V DC to 12V DC inventor inverts the voltage
to 12V. All light bulbs work on 12V.
The alarm needs 48V to work, it is sensitive to vibration.
However, it consumes a very small amount of the power
provided. It is recommended that when the EScooter is
stored for long periods of time without use, that you
would turn OFF the main breaker.
14
SIDECAR