GLI PROTECT-A-POOL Скачать руководство пользователя страница 6

Страница: 6 / 7

STEP 5

DIAGRAM 5-A

DIAGRAM 5-B

Insert spindles into the bottom rail

Install top rail using instruction in Step 4.

STEP 6

Insert all caps. If necessary, use adhesive such as Liquid Nails to hold caps in place.

STEP 7

Check to be sure installation is secure by lightly shaking each section to be sure screws were
properly installed.

Содержание PROTECT-A-POOL

Страница 1: ......

Страница 4: ... Fence end posts must be installed where fence will start and stop Slide fence end post onto the mounting bracket Allow at least 1 2 between the post and the pool s top cap This will allow for easy installation of winter cover Attach fence post to mounting bracket using four 8 screws Continue by mounting remaining fence posts to mounting bracket DIAGRAM 3 ...

Страница 5: ...ost Cut bottom rail to this measurement Note cut equal amounts off each end of rail to ensure balanced spacing of spindles Do not install top rail yet Attach bottom rail to post using two 8 screws DIAGRAM 4 B Do not cut more than one rail at a time Distance between pool uprights may vary Continue by cutting and installing remaining bottom rails DIAGRAM 4 A DIAGRAM 4 B ...

Страница 6: ... rail Install top rail using instruction in Step 4 STEP 6 Insert all caps If necessary use adhesive such as Liquid Nails to hold caps in place STEP 7 Check to be sure installation is secure by lightly shaking each section to be sure screws were properly installed ...