Page
21
of
24
MICROPHONE GAIN
The two microphone inputs of the Express
IP
MKII have a fixed gain level.
To account for the higher gain level of condenser microphones; when the phantom
power switch is turned on a -10dB pad is applied to the output.
If you have a microphone with an exceptionally high output level, the Express
IP
MKII
fixed gain level may not be low enough to avoid clipping.
It is possible to change the gain by removing two internal links. This process is semi-
permenant, as it requires a sharp object to do it and a soldering iron to undo it.
Warning
This process must only be undertaken by an approved technician.
DO NOT
attempt
this procedure unless you know what you are doing.
Take extreme care.
Equipment needed
1x M3 Screwdriver
1x A small precision sharp object
– A scapel is best
Disconnect the Express
IP
MKII from all power sources before continuing.
Procedure
To disassemble the Express
IP
MKII, remove screws 1, 2, 3 and 4 from the bottom
panel.
1
2
3
4
Содержание Express IP MKII
Страница 12: ...Page 12 of 24 SIMPLIFIED BLOCK DIAGRAM...
