Page
22
of
27
AES67 MODE
The Bella 32 uses a Brooklyn 2 module from Audinate for its network audio interface.
Audinate are the company behind Dante
®
and as such the
module’s primary network
audio protocol is Dante, however Audinate have enabled their module to comply with
AES67 and therefore the Bella 32 can be set to AES67 mode for interaction with
other AES67 devices.
Please note however that Glensound are relying on Audi
nate’s AES67 interface and
are unfortunately not able to provide full AES67 support for the unit. AES67 support
should be sought directly from Audinate.
1. Turning On AES67 Mode
If you want to use your Bella 32 on an AES67 network and it has not been set to
AES67 mode then this can be set in Dante controller by double clicking the Bella 32
to open the Device View window where you will find an AES67 tab to enable AES67
support.
Once the AES67 drop down box has been enabled you’ll have to reboot the Bella 32
for the change to take effect. After the reboot go back to the AES67 tab and set the
multicast prefix address to one that is suitable for your network.
Содержание Dante BELLA 32
Страница 25: ...Page 25 of 27 SPECIFICATIONS...
